| No. |
Component |
Name |
Description |
| (a) |
 |
Operation mode indicator |
PU: ON to indicate the PU operation mode.
EXT: ON to indicate the External operation mode.
NET: ON to indicate the Network operation mode.
PU and EXT: ON to indicate the External/PU combined operation mode 1 or 2.
|
| (b) |
 |
Operation panel status indicator |
MON: ON to indicate the monitoring mode. Quickly blinks twice intermittently while the protective function is activated.
|
| (c) |
 |
Control motor indicator |
IM: ON to indicate the induction motor control.
PM: ON to indicate the PM sensorless vector control.
|
| (d) |
 |
Frequency unit indicator |
ON to indicate frequency. (Blinks when the set frequency is displayed in the monitor.)
|
| (e) |
 |
Monitor (5-digit LED) |
Shows the frequency, parameter number, etc.
|
| (f) |
 |
PLC function indicator |
ON to indicate that the sequence program can be executed.
|
| (g) |
|
FWD key, REV key |
FWD key: Starts forward rotation. The LED is on during forward operation.
REV key: Starts reverse rotation. The LED is on during reverse operation.
|
| (h) |
 |
STOP/RESET key |
Stops the operation commands.
|
| (i) |
 |
Setting dial |
The setting dial of the Mitsubishi inverters. The setting dial is used to change the frequency and parameter settings.
|
| (j) |
 |
MODE key |
Switches to different modes.
|
| (k) |
|
SET key |
Enters each setting.
If pressed during operation, the monitored item changes.
|
| (l) |
 |
ESC key |
Goes back to the previous display.
|
| (m) |
 |
PU/EXT key |
Switches between the PU operation mode, the PUJOG operation mode, and the External operation mode.
|
